Ring Die Duck Feed Pellet Production Line
Description of ring die duck feed pellet machine:
Ring Die Feed Pellet Machine The models in the digestion and absorption of foreign advanced technology of our company based on the successful model of using rotating roller plate inlaid, the function has reached the international advanced level. The machine is equipped with overload protection, evenly distributed, low noise, making its operations more secure and reliable. Conditioner with large diameter, so that material to ripen more fully and make the grain more smooth, moderate hardness, rate of 98%, and minimize the rate of wear. Speed feed accurately controlling feeding quantity, and to adapt to different materials, production needs with different particle diameters.
Advantage of small duck feed pellet production line:
1.Directly transmission with high-precision,evolvent,cylinder,helical tooth gear,transmission efficiency more than 90%.
2.Transmission gear and gear billet through normalizing high heat treatment,enhance hardness of the tooth surface adopt carburize technologh,carburized layer reach 2.4mm,increase the abrasive resistance,increase the lifetime,tooth surface handle through accurate grinding,silent,tip relief,make it operation with quiet and smooth and steady.
3.Principal axis and connection hollow shaft both adopt German alloy steel,through water hammer,rough turn,heat treatment,finish turning.
4.The bear and oil seal for transmission part all adopt Japan high precision bear and America wear-resisting,Heat-resistant fluoro rubber oil seal;add lubrication oil return system,oil circulating cooling,automatic timing for oil lubrication,to ensure adequate lubrication of the bearing,operation more safe and reliable.
5.Pelleting molding system adopt high quality silent bear,and add thin oil circulation cooling lubrication system,the lifetime will increase,operation more safe.
Ring die duck feed pellets product processing
Raw material receiving and cleaning process—Grinding process—Mixing process—Pelleting process—Cooling process—Crumbling process—Screening process—Packing process
Main procedures of ring die duck feed production line
Before making pellet, the raw materials should be grinded. The hammer mill can grind the raw material ingredients to the required size.
Mixing is considered to be one of the essential operations in feed pellet processing, using mixer to mix the grinded raw materials. There are three types of our mixer: single shaft mixer, double shaft paddle mixer and ribbon mixer. Both of them can be equipped with atomizing spraying system to add needed liquids, which can improve the feed pellet quality.
Feed pellet mill is the main equipment of the whole production line. Our pellet mills are equipped with full stainless steel feeder and conditioner to make high quality pellet. We can supply chicken feed pellet mill, duck feed pellet mill, cattle feed pellet mill, pig feed pellet mill and other poultry and livestock pellet machinery.
The feed pellets pressed out by the feed pellet mill are hot and moist, they can’t be crushed, screened or packed immediately. The counter flow cooler is adopted to cool the pellets with high temperature and moisture.
Crumbling section is optional. It is special purpose equipment to crumble big pellets into small pellets.
The crushed feed pellets are with different sizes, and there may be some powder. The screener can be used to screen and grade the feed pellets. After processing, you can get the qualified feed pellets without fine powder.
The feed pellets will be packed for transporting, storing or selling by packing machine.