Straw Pellet Production Line/Wood Sawdust pellet manufacturing plant
Features of Straw Pellet Production Line
- Top technology with national patent
- Customized design and reasonable price.
- Non-dust workshop with experienced engineers.
- Main machines adopt Siemens motor and imported SKF/NSK bearing.
- PLC control(Siemens) and Schneider or Soft Starter electric control system.
- Long service time and stable operation.
- Guide installation and commissioning is available.
Complete Pellet production line process
(a) Peeling Process
Wood debarker machine is applicable to peel the log of MDF board and papermaking industry, it is mainly used to peel log, small wood and so on, the peeled rate is more than 95 percent.
In the pellet plant before raw materials are made into biomass pellets, they are first reduced into much smaller, uniformly-sized particles. When the thicknedd is larger than 10mm or the size is greater than 50*50mm, a chippper is needed to chip these materials into smaller pieces.
The hammer mill is used to further crush these small pieces into particles of less than 3mm in diameter.
After raw materials are crushed a dryer is needed since most raw wood materials havea moisture content of about 50%. However, the optimal moisture content for pelletiztionis 13%-15%. Therefore a rotary dryer is included in the pellet plant to reduce the moisture content. After crushing and drying you can begin making wood pellets.
After crushing and drying the raw material properly it is then ready for the pellet mill. The pelletizing machine or press is the key piece of machinery in the pellet plant. It should be mentioned that impurities in the raw materials like metal or stone,may damage the die and rollers of pellet making machine.
Usually after pelletizing, the temperature of pellets is between 60-80 degrees and the moisture content is close to 15%. For storage purpose, a cooler must be used to reduce their surface temperature and moisture content.
Finally is the packing process. In order to protect the wood pellets becoming getting damp and to increase storability, proper packing is necessary.
Depending on customers' requirement,such as wooden box or Iron crate etc.
Our shipping operator and delivering equipments will be ready on time to ensure
goods shipped based on Sales Order requirement.
Detail Quotation Solutions for you, we need to know Information as Follows:
(1). What capacity would your prefer?
The Capacity Range of Wood Pellet Machine: 0.8-1T; 1.5-2T; 2-3T;3-4T.
(2).What is your raw material?
According to different raw material(such as hard wood,soft wood,straw,rice husk), capacity is different.
(3).What is your raw material size?
Best size for pressing high quality pellets is 3mm-5mm.
(4).What is the moisture of your raw material?
Better to be 10-15%.( If large than this, then we will recommend your Dryer Machine)
(5).Final Pellets Size?
We have Diameter for Pellets:6mm, 8mm, 10mm, 12mm, (Different Diameters for your Different Requirement.)Pellets Length: Adjustable20-50mm. (Normally our clients ask pellets length of 33mm, between 30-36mm)
-24 Hours Online Service.
-Inquiry will be replied within 2 hours.
-All-the-way tracking service offered from placing order to delivery.
-Free training for operation, debugging and daily maintenance.
-We can provide professional guide installation.
-One year warranty and all-round after-sales service.
-Customized design and flow chart are available for our clients.
-Independent R&D team and strict & scientific management system.
Why choose us?
Advantages we have:
Experienced biomass and feed pellet line related supplier for over 20 years.
Professional sales and engineers team for your service.
High quality as all of the products have approved CE&ISO9001&SGS certifications
Use most up-to-date CNC Machine Center to ensure the quality standards.
Already supplied over 1,000 turn-key projects with great satisfaction.