LYGX213 3-5t/H Professional Wood Chipper Wood Drum Chipper Wood Pellet Chipper

LYGX213 3-5t/H Professional Wood Chipper Wood Drum Chipper Wood Pellet Chipper
Product Details

Introduction of LY Series Drum chipper
Drum Chipper is one kind of special equipment for producing wood chips, widely used in the raw material preparing process in the factories of flakeboard, fiberboard, papermaking and wood chips making plant. Small drum type wood chipper is the best equipment for factory's laboratory preparing material.
Raw material for Drum type wood chipper cutting is mainly small trail wood, lumbering remainds ( such as branches, twigs, tress pallets etc) and woodworking remainds ( such as slab, plank, log core, waste veneer etc). It also can be used to chip non-lignin raw material (such as flax pole, bulrush, bamboo etc).

Characteristics of wood chipper machine:  

1. Structure of main machine is beautiful,easy installation and little space taking.
2. Driving wheel in feed inlet synchronous run together with the feed wheel in main body.
3. Snap-in feedstock is stronger and more powerfull.
4. Control system is composed of hydraulic and frequency conversion,reduce the maintenance cost effectively.
5. Adopting imported high quality blade which greatly improve the work efficiency.
6. Both forward and reverse are accepted for feeding to avoid the material being got stuck .
7. The hydraulic cover can be tore down more easily,saving time and manpower more peace of mind.
8. Input and output adopts full automatic control,ensure both sides work synchronously carry on.
9. Wear-resistant sharp alloy tool, reliable advanced and to enhance its service life.
10. Wearing parts low-consumption, low running cost.
11.Hydraulic system: From the pump to oil cylinders, the cover can be opened, it is easy to change the blade. It can raise the upper feed roller in maintenance, it is easy to adjust the space between fly cutter and knife.
12.Two or three knives are installed on knife roller with specialized in manufacturing, the fly cutter is fixed on the knife roller through the bolt. According to the different thickness of raw materials by cutting, feed roller assembly by hydraulic system can fluctuate within a certain scope. Cutting down the qualified materials through the screen mesh from bottom of large discharge will cutting again in the inner of this machine.

Details of our wood chippers


Work process of LYGX Series Drum chipper
The raw materials (such as the log, branches, big pieces) feeding through the feeding equipment. Then go through the knives roller to cut into small wood pieces.  

Main structure of LYGX Series Drum chipper
Drum wood chipper is composed of base, blade roller, upper and nether (below) feeding organization, feeding equipment, hydraulic press cushion system.


Finished wood chips



Feedback