Introduction for feed pelletizer making machine FDSP feed pellet machine is an ideal pelletizing machine for high quality feed pellets.It is the most common type pellet machine in feed industry. Features of feed pelletizer making machine a)Adopt aerodynamic technology, reducing the temperature...
Introduction for feed pelletizer making machine
FDSP feed pelletizer machine is an ideal pelletizing machine for high quality feed pellets.It is the most common type pellet machine in feed industry.
Features of feed pelletizer making machine
Suitable for producing poultry and livestock feed.
high production efficiency
Gearbox directli-connecting driving is adopted for high efficiency.The capacity increases 15% than belt driving.
high Efficient Rigid Conditioner
Lengthened and super-scale type stainless steel conditioner,with well designed paddle and rotate speed,with long cooking time,which makes the raw materials cooks well enough.
conditioner axial end special sealed,axial steam spraying device is adopted for full contact about raw materials and steam overflow to feeder eradicated.
Pelleting process working principle
♦ The main motor drive the ring die mould rotated. the press roller that were placed inside of the roller does not revolution, but will rotate because the friction of the ring die mould and poultry animal feed powder raw material.
♦ The feed material was spread evenly into the space between the ring die and roller, and was press into the mould hole, formed column shape pellet, the pellet will rotate along with the rotating ring die mould and will be cutted when the length of the column pellet reach to a certain value.
Feed pelletizer making machine working principle
The working process is as follows: the compound powder material with water content no greater than 13% enter into screw feeder through hopper, through adjusting the rotational speed of screw feeder axis to obtain the suitable flow of material, the security magnets remove the magnetic impurity mingling with supplies, then enter the conditioner, through the agitating of conditioner axle to mix with steam to do the conditioning, if needs to add molasses or oil, also to add it from conditioner barrel joining together with steam and conditioning together, (the adding amount of oil seldom exceeds 3%, otherwise difficult to take shape), after conditioning the compound powder material temperature could reach 75-90 ℃, humidity is up to 15%. Then through the chute, enter the pressing room to pelletize finally.
With the most mature technology, the pellets made by our machine have such features:
Good hardness and durability
Easy to digest for poultry The diameter of finished pellet can be Φ1.5, Φ2, Φ3, Φ4, Φ4.5, Φ5, Φ6, Φ8, Φ10, Φ12mm, etc(ranges from 1.5-18mm). The length is 3-7cm. It can be customized according to different requirement. The pellets can be as feed stuff for many kinds of animals like chicken, duck, goose, cow, cattle, horse,sheep, pig, rabbit, fish, shrimp, and so on.
Inner diameter of