Compared with normal aqua feed pellet mill, DDC conditioner is often used in special grade aqua feed making. The features are as follows: 1.Two shafts of conditioners are different in diameter and rotational speed showing a different movement with opposite rotation direction, which makes the...
●Double-shaft Different Speed Conditioner
Long cooking time,high cooking degree
●Double-layer Jacket Conditioner
The outlet jacketed insulation makes higher temperature in conditioner,no condensate
The shrimp and crab feed has following characteristics: fine grinded particles(Pacific white shrimp feed requires 59% should be with 80mesh), high requirement for curing and conditioning(SZLH420x pellet mill adopt double shaft differential speed conditioner, retainer and jacket conditioner), good water resistance(using post-curing process), small diameter for finished pellet (the diameter around 1.0-2.5mm).
The purpose of pelletize is to make use of the heat, moisture, and pressure in pelleting process to pelletize the feed which may be loose, easy to dust, with poor palatability and hard to transport, then the feed could be with better palatability, lower feed conversion rate, reduce feed waste and environmental pollution. In this process, we use one set belt driven shrimp feed pellet mill SZLH420x which adopt double shaft differential speed conditioner, retainer and jacket conditioner, it ensure the requirement for curing ahead. two pellet bins are set above theSZLH420x pellet mill. The finished pellets will make the post curing processing in stabilizer to improve the feed stability in water, then to be cooled in the cooler, after that go into the rotary screener for shifting through bucket elevator , finally the finished product are packed into the bagging bins.
The Details of DDC fish pellet machine
Meanwhile, conditioners of the pellet machine also can be customized to meet your different request, like single layer conditioner, double layer conditioner, three layer conditioner; jacket type conditioner or Differential Diameter Conditioner(DDC) etc.
All the FDSP conditioners are made from stainless steel, have a very stable design and allow an easy installation on top of the pellet mill.
Attractive advantages of special aqua fish pellet machine
Siemens motor, Imported SKF/NSK bearing
Equiped with auto cooling and oil adding system
Application of FDSP special aqua feed pelletizing machine
1. Pellet mill machine/hops pellet making machine supplier for exporting adopts gear directly-connecting driving for high efficiency.
2. Full stainless steel feeder; variable pitch anti-bridging structure;
3. Full stainless steel conditioner with axial steam spraying extends the conditioning and cooking time;
4. Main gear and pinion shaft adopt the carbonizing quenching with high accuracy; smooth driving, low noise and long service life;
5. Gearbox and driving holes’accuracy of this granulator are guaranteed by specialized casting supplier;
6. The bearing and oil seal in the main drive are imported, and especially lubrication oil return system is available to ensure reliable bearing lubrication;
7. 3 pc quick disassembling type precisely-cast die clamp is adopted to connect the die and quill flange, resulting in convenient and quick disassembling of die;
8. Pellet chamber door and feed chute are fully made of stainless steel with high anti-corrosion ability and long service life;
9. The connection between motor and gearbox adopts new type S-shape spring coupling with more convenient disassembling and assembling and more reliable use.
Related Equipment of FDSP fish pellet machine