Cattle Feed Impeller Feeder

Product Details

Working principle  

Cattle Feed Impeller FeederThe raw material enters the machinery through the inlet and is conveyed upward by the impeller feeder. It then gets into the self-cleaning magnets and finally enters the hammer mill. The impeller feeder consists of impeller, gear motor, self-cleaning magnets, air adjustment door, etc.







Introduction of impeller feeder

1.SWLY series impeller feeder is composed of intercross impellers.It can evenly feed.

2.It is with self-clean magnetic separator,uniform distribution,iron-removal.

3.Axial direction of hammer mill is uniform to feed which can reduce abrasion of hammers and vibration, enhance the service life.

4.It is to be intact aspiration adjusting device combined with hammer mill.

5.RPM can be adjusted by FC Inverter easily.

6.It can be fulfilled automatic control with control of current of main motor.

Cattle Feed Impeller Feeder

     

Advantages Of Feeder on Hammer Mill 

  1. Feed evenly: SWLY series impeller feeder is composed of intercross impellers. It can evenly feed.

  2. well cleaning efficiency: It is with self-clean magnetic separator, uniform distribution, iron-removal. 

  3. Long service life:Axial direction of hammer mill is uniform to feed which can reduce abrasion of hammers and vibration, enhance the service life.

  4. Adjustable aspiration: It is to be intact aspiration adjusting device combined with hammer mill.

  5. Easy operation: RPM can be adjusted by FC Inverter easily.


Cattle Feed Impeller Feeder


Technical parameters

Model

SWLY300

SWLY400

SWLY500

SWLY600

SWLY700

SWLY750

SWLY800

 Power(kw)

0.75/1.1

0.75/1.1

1.1

1.1

1.1/1.5

1.1/1.5

1.1/1.5

Dia Of Inlet(mm)

225×300

225×400

225×500

225×600

225×700

225×750

225×800

Dia Of Outlet (mm)

310×300

310×400

310×500

310×600

310×700

310×750

310×800

Feedback