Wood Chipper Shredder/ Wood Pulverizer/Wood Chipper

Wood Chipper Shredder/ Wood Pulverizer/Wood Chipper
Chat Now
Product Details
  • Model NO.: LYGX-218

  • Type: Wood Chipper

  • Wood Chips: 1-5mm Thickness, 10-35mm Length

  • Discharging Belt Conveyor: 10m Lngth for Convey The Wood Chips

  • Spare Parts: Feeding Rubber Belts, Flying Knives

  • Usage: Saw Plant, Furnature Plant, Paper Industrial

  • Trademark: Leabon

  • Origin: Jiangsu Province

  • Certification: CE, SGS

  • Raw Mateirlas: Wood, Logs, Wood Barks

  • Wood Feeding Belt Conveyor: 6m Length for Inlet of Working Chamber

  • Installment Mode: No Need Base Concrete

  • Auxiliary Equipment: Logs Debarker, Wood Splitter, and Knives Sharping

  • Usage of Wood Chips: Paper , Pallet, Wood Pellets

  • Specification: CE SGS BV

  • HS Code: 84659600

The wood preparaton before drum wood chipper: 
The Small drum wood chipper can cut wood logs, small dimension wood and brushwood under the diameter of 200mm. It can be applied into pulp mill, trees, paper mill, wood factory etc. Wood chipper is mainly formed by the host, coupling and chassis, motor parts, including cutting machine, cutter host by trim, feeding and discharging port, etc. 

Basic features: 
1. Knife roll cutting part equips with protection plate, effectively prolongs the service life of knife roller. 
2. Bearing ensures the equipment's performance and service life under continuous full load operation state. 
3. The feeding belt conveyor of chipper adopts high strength wear-resistant belt. Supporting roller adopts elastic rubber roller, which absorbs the vibration and strike in the process of conveying so that protects the belt. 
4. The chipper is composed of machine seat, drum rotor, upper and lower feed rollers, feeding belt conveyor, hydraulic system, etc. 
5. Cutting range: Cutting logs, branches, slab, waste veneer, bamboo, cotton stalks, and other non-wood fiber stems into dimensional chips which are the essential material for the production of particle board, fireboard and paper pulp. 

The advantages of the wood /log chipper drum
1. Drum type wood /log chipper also called the drum chipper, drum chips machine. They are the most popular chips machine for dealing with the wood logs, slim lumber, wood waste, branches, bamboo etc. 
2. The chips from this wood /log chipper can be used in pulp and paper making plant, particleboard plant, wood pellets making plant and so on. And they are also the ideal and direct fuel for the boilers or the biomass boilers. 
3. The wood /log chippper can always works together with belt conveyors for feeding and out feeding, so it is easy to achieve the Automation. Besides this, Operation easy, maintenances simple, life long and the noise is low. But output is much higher than the ordinary ones. 
4. We choose these Wood /log chipper from hundred of manufacturers in China mainland. The price is very good and the quality is very high. 

Structure and Working Principles of Wood /log Chipper: 
It consists engine base, cutter roller, feeding roller, conveyor and hydraulic system and so on. The engine base is welded by high strength steel plate, 
It's the supporting base of the whole machine. On the cutter roller, there installs two or three flying cutter. Through the professional bolt, fixed the flying cutters on the roller. 
According to the thickness of the raw materials, the feeding roller can moves up and down through the helping of hydraulic system. The satisfied chips can be discharged at the bottom of the machine through the screen. 
The bigger chips will be cutted again in the chamber of machine.