Wood debarker ( wood peeling machine ) is used for peeling bark of logs, mainly used in wood pulp and paper mills and wood-based panel plant which will use the wood log as raw material. With small investment, low energy consumption, less space occupied, low construction costs, High capacity and...
Wood debarker (wood peeling machine) is used for peeling bark of logs, mainly used in wood pulp and paper mills and wood-based panel plant which will use the wood log as raw material. With small investment, low energy consumption, less space occupied, low construction costs, High capacity and other characteristics. Suitable for connecting medium and large sized wood chipper, as well as dosing effect.Tooth roll wood debarker is the equipment that peeling the epidermal of logs, divided into one end of the discharge and side discharge, its characters are high peeling efficiency, heavy load, high speed, the wear resistance, high corrosion resistance. It can be produced as customer’s need.
Logs from the upper side near the drive go into wood debarker machine, With the drive motor and drive components, the peeling machine with teeth will rotate by a certain direction, will direct peel the bark off, while rotating peeling roller will bring the wood logs move together, so that the stack of logs rolling up and down, touching, hitting, rubbing each other between the logs. The barks will be peeled down and through the roller and the plate tooth falls out on the conveyor belt .
1.If use the open silos, can feed from one side and discharge from the other side, Avoid the existing roller peeling machine feeding/discharging without power, Make sure the high efficiency.
2. Due to the teeth segments impact to wooden, not only make the wood log do circular motion , and rotating around its own. So the peeling efficiency will be very high, Especially for cold, dry and hard skinned species wood log will has a good peel net rate.
3. Widely adaptability, The machine can handle different species, diameter, length and shape wood log. Due to the wood log irregular beating do rotary movement during peeling, so even curved recess parts on the wood logs can also be touched with teeth very well. Therefore, bending wood log can be peeled very well than other machines..
4. Due to the machine is stationary, the energy consumption will be very small, failure rate will be very low. And maintenance workload is small as well. Vibration and noise will be much lower than the drum peeling machine, The wood debarker can work directly, even without the base installation, easy operation.