Wood Hammer Mill Descriptions：
MFSP Series hammer mill is new type grinding equipment which is independently developed and used for wood, fiber materials.Widely used in biomass materials (wood chips, straw, rice straw, peanut shells, bagasse, alfalfa, etc.) grinding, High efficiency, Low energy consumption.
Material which is needed grinding will go inside through the feeder matched with the machine. Cross the guide plate to feed intothe crushing chamber from the left or right.The material was crushed gradually under the high-speed rotation hammer hitting and sieve friction effect. And the material passed through the sieve under the centrifugal force and gas flow. Discharged from the outlet of the base.
Auxiliary systems: Fan, Cyclone,Airlock, Pulse filter.
Spare parts: Hammer, screen
Detail images of wood hammer mill
1. It is suitable for coarse-grinding and micro-grinding of various granular grain materials, such as wood, straw, palm, peanut shell, bamboo chip, charcoal, wood shavings.
2. It is applicable for micro-grinding of various large-medium and small-sized biomass pellets. It is also suitable for micro-grinding in the industry of pharmaceutical, alcohol and solvent.
1. The unique design of the secondary crushing chamber structure, effectively change the trajectory of the material, especially for fine grinding. The capacity can increase 30% than the competitors.
2. The unique design of the structure with the upper sub-chamber blocking panels, effectively changing the material circulation, The capacity can increase 20% than the competitors.
3. Super wide working area. Width up to 1.5 times than the ordinary micro-mill, equipped with high-precision balancing rotor, fully optimized arrangement of the hammer, crushing performance to new highs.
4. Easy maintenance and operation. Moveable full operation door, More convenient to replace the hammer and screen.
5. Wind go inside through sideways, changing the grinding chamber wind direction, improve grinding efficiency, reduce the main bearing operating temperature.
6. The spare parts use new composite materials, long service life.
7. The vacuum production environment, no dust, good working environment.
Diameter of rotor (mm)
Width of grinding chamber (mm)